Bollegraaf Recycling Solutions

Toestand: werkplaats gereviseerd (gebruikt), Bouwjaar: 2001, Functionaliteit: volledig functioneel, machine-/voertuignummer: HBC 140 2x75kW 2001 (210-008-01), perskracht: 155 t, baalgewicht: 1.500 kg, druk: 250 bar, power: 150 kW (203,94 pk), jaar van laatste revisie: 2024, Apparatuur: documentatie/handleiding, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Iajlhstvau Aocdwwjr Baler: Weight: 47.100 kg Construction year: 2001 Variable channel pressure control Plastic valve Anti-rat cabling Hours 0 after full refurbishment This baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Toestand: werkplaats gereviseerd (gebruikt), Bouwjaar: 2003, Functionaliteit: volledig functioneel, machine-/voertuignummer: W230-028, perskracht: 80 t, garantieperiode: 24 maanden, druk: 250 bar, power: 45 kW (61,18 pk), jaar van laatste revisie: 2024, systeemdruk: 250 bar, Apparatuur: documentatie/handleiding, Deze volledig gereviseerde balenpers wordt verkocht door Bollegraaf Recycling Solutions. Het betreft hier een balenpers HBC80 (45kW) met verticale afbinding Deze balenpers is reeds volledig gereviseerd in onze revisie werkplaats. Deze revisie vind plaats aan de hand van de zeer strikte Bollegraaf OEM Refurbishment Guidelines. Na revisie wordt deze balenpers verkocht inclusief 2 jaren garantie. Iajlhcdwjtvat Towor Deze pers wordt geleverd met onderstaande opties: * bokken, * tussentrechter, * Baaluitloop, * Draadrolplateaus

Toestand: over het algemeen gereviseerd (gebruikt), Bouwjaar: 2010, bedrijfsuren: 26.174 h, machine-/voertuignummer: 01527 Veolia Gent, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. Technical data baler Typ HBC 120 K Year of construction 2010 Press power main press 120 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Bale size 1,100 x 720 mm Driving motor 90 kW Double Channel Pressure cilinders for increased bale density Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. Ielhsq D Az Rocdwwsar MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Toestand: zo goed als nieuw (tentoonstellingsmachine), Bouwjaar: 2022, Functionaliteit: volledig functioneel, machine-/voertuignummer: GBS 275/2040/2400/10, LUBO StarScreen GBS 275/2040/2400/10 10 assen, S355 gelaste sterassen Per as, 33 ST. 250MM star en 33 ST. 262MM star Iaelhceqwddpedwwer Hart op hart afstand assen: 241.3

Toestand: zo goed als nieuw (tentoonstellingsmachine), Bouwjaar: 2006, Functionaliteit: volledig functioneel, machine-/voertuignummer: 0605.1283, TEMA vlakke trilzeef Type OZB 90/360-55. Ielhcdwoqwclqowjar Aandrijving 2x Onbalans P= 2,1 kW. Zeefdek breedte 900mm. lengte 3.600mm. Inclusief: ondersteuningsframe. (zoals op de foto zichtbaar) Is in goede staat. Weinig draaiuren. Is altijd gebruikt als demo/test zeef. Per direct beschikbaar.

Bouwjaar: 2003, bedrijfsuren: 43.000 h, Toestand: moet gerepareerd worden (gebruikt), machine-/voertuignummer: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Islokcgynohcdwwoar Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Bouwjaar: 2008, bedrijfsuren: 40.000 h, Toestand: goed (gebruikt), machine-/voertuignummer: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. Iaslhjkcgf Hocdwwjr The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Bouwjaar: 2006, bedrijfsuren: 24.967 h, Toestand: werkplaats gereviseerd (gebruikt), machine-/voertuignummer: W250-069.020, Deze volledig gereviseerde balenpers wordt verkocht door Bollegraaf Recycling Solutions. Het betreft hier een balenpers HBC80 (45kW) met o.a. kruisdraden. Deze balenpers wordt op het moment van schrijven volledig gereviseerd in onze revisie werkplaats. Ijlhcdwoiwa Ipowsar Deze revisie vind plaats aan de hand van de zeer strikte Bollegraaf OEM Refurbishment Guidelines. Na revisie wordt deze balenpers verkocht inclusief 2 jaren garantie.